一、產品特征       

        該產品是由兩種或兩種以上的耐高溫纖維混合及層狀復合針刺而成，耐酸、耐堿良好。FMS濾料與玻璃纖維濾料相比，其耐磨性，抗折性及剝離強度都有明顯的提高。過濾速度可達1.0m/min以上，運行阻力低。FMS濾料廣泛應用于鋼鐵、有色冶煉、化工、炭黑、建材、電力等部門。

        This product is made of two or more kinds of high temperature resistant fibers mixed with layered composite needling, acid and alkali resistance is good. The wear resistance, flexural resistance and peeling strength of FMS filter material are obviously improved compared with that of glass fiber filter material. The filtration speed can reach more than 1.0m/min and the running resistance is low. FMS filter material is widely used in iron and steel, non-ferrous smelting, chemical industry, carbon black, building materials, power and other departments.

二、性能指標

       克重：>930g/㎡

       材質：芳綸纖維+無堿玻纖短切/中堿玻纖基布

       厚度：2.4-3.0mm

       透氣量：8-15m3/㎡·min

       經向拉力：>1800N/5*500px

       緯向拉力：>1800N/5*500px

       經向伸長：<5％

       緯向伸長：<5％

       使用溫度：正常適用180-220℃，瞬間280℃

       后處理：泰氟隆處理